Electrophoresis Supplies, Sample Application Devices

Sample Application Devices

4088

4087........4039......... 4105

Applicators
Super Z, Super Z-12, Super CK, and Macro Z applicators are used with Titan III cellulose acetate. Tips are photo-etched stainless steel and independently suspended to eliminate application artifacts. The only pressure exerted on the cellulose acetate is the weight of the tip. Super Z and Z-12 applicators hold 0.25 μL of sample; Super CK applicator holds 0.5 μL. Super Z and Super CK applicators apply 8 samples simultaneously, Super Z-12 applies 12 samples. Macro Z applicator, available in 4-sample or 6-sample size, provides a wider electrophoresis pattern. Use Zip Zone Prep (Cat. No. 5090) to clean tip.

Applicator	Applicator Kit* System	Applicator 1/pkg	Sample Well Plate 2/pkg	Aligning Base 1/pkg	Replacement Tips 2/pkg
	Cat. No.	Cat. No.	Cat. No.	Cat. No.	Cat. No.
Super Z	4088	4084	4085	4086	4087
Super Z-12	4093	4090	4096	4094	4087
Super CK		4091	4095	4094	4039
Macro Z (4)		4099	4101	4086	4105
Macro Z (6)		4100	4102	4094	4105

*Includes applicator, 2 sample well plates, aligning base and a bottle of Zip Zone Prep.

Zip Zone® and Titan® IV Applicator System

Cat. No.	Item
4080	Zip Zone Applicator, 1/pkg
4081	Zip Zone Sample Well Plate, 1/pkg
4082	Zip Zone Aligning Base, 1/pkg
4083	Titan IV Aligning Base, 1/pkg
5090	Zip Zone Prep, 1 x 60 mL
Zip Zone Applicator System is used with Titan IV Citrate Agar Hemoglobin Electrophoresis. Plastic tips apply samples uniformly without cutting agar. Titan IV Aligning Base allows two off-center applications for a total of 16 samples. Use Zip Zone Prep to clean applicator tips.

5 μL Microdispenser

Cat. No.	Item
6008	5 μL Microdispenser, 1 dispenser, 100 bores
6010	Glass Bores, 100/pkg

Microdispenser features precision stainless steel plunger and disposable glass bores. Aluminum "collars" allow dispensing from 1 to 5 μL, in 1 μL increments.

Dialamatic Microdispenser

Cat. No.	Item
6210	10 μL Microdispenser, 1 mL increments
6211	10 μL Dialamatic Tubes, 100/pkg
6225	25 μL Microdispenser, 1 mL increments
6226	25 μL Dialamatic Tubes, 100/pkg
6250	50 μL Microdispenser, 2 mL increments
6251	50 μL Dialamatic Tubes, 100/pkg
6276	100 μL Microdispenser, 100/pkg
Dialamatic Microdispensers feature: sample preset, stainless steel plunger (10 mL unit), replaceable plunger tips (25, 50, and 100 mL units), precision glass disposable bores, ± 1% volumetric tolerance.

Microdispenser Replacement Part Kits

Cat. No.	Item	Description
6011	Parts Kit for 5 μL Microdispenser	2 plungers, 2 o-rings, 1 collet, 1 coil spring & 1 spring guide
6212	Parts Kit for 10 μL Microdispenser	2 plungers, 2 o-rings, 1 collet, 1 coil spring & 1 spring guide
6228	Parts Kit for 25 μL Microdispenser	3 Teflon tips, 1 plunger, 2 o-rings, 1 collet, 1 coil spring & 1 spring guide
6253	Parts Kit for 50 μL Microdispenser	3 Teflon tips, 1 plunger, 2 o-rings, 1 collet, 1 coil spring & 1 spring guide
6278	Parts Kit for 100 μL Microdispenser	3 Teflon tips, 1 plunger, 2 o-rings, 1 collet, 1 coil spring & 1 spring guide